Technical paper presenting an overview of the advancements in braided preform architectures and braiding machinery, identifying braiding as an attractive process for composite manufacturers. Authors: Mike Braley and Molly Dingeldein. [PDF]
Technical paper summarizing recent developments in nanotechnology for composites, including specific techniques for the creation of nanosize structures within textile based composites, a review of nanosize fillers and their performance, and an introduction to a novel concept of textile surface coating. Authors: L. Qian and J.P. Hinestroza. [PDF]
Extensive technical paper reviewing new automated fabrication processes for the manufacture of high-performance graphite-fiber reinforced composite structures. Authors: M.J. Stuart and others.
Technical paper presenting the tensile, compressive, shear, tensile fatique, and tensile creep properties of a reference crossply composite, intended for use as the basis for a full-scale durability test program for crossply composites. Authors: J.M. Corum and others. [PDF]
Technical paper about research aimed at developing a high purity cellulose/wollastonite pellet which can be accurately metered and fed into a laboratory scale twin-screw extruder and compounded with nylon-6 resing to create hybrid composites. Authors: R.E. Jacobson and D.F. Caulfield. [PDF]
Short article on the different reinforcement structures in the composite industry, and descriptions of the most common polymeric and inorganic fibers in use. From the New Textiles magazine.
Electronic version of a composite materials class, aiming to teach the origin of mechanical behaviour and the manufacturing technologies of modern composites. Extensive technical descriptions, diagrams and equations. From the Michigan Technology University.
Extensive paper about the history and current developments, materials, fabrication techniques and applications of composites, including a glossary of terms and a reading list. From the Composite Processing Association.
Technical paper documenting the cost and performance advantages of three-dimensionally woven materials used as standard reinforcement for marine and industrial composites. From 3Tex, Inc. Authors: Donald Stobbe and Mansour Mohamed. [PDF]
Technical paper discussing the use of dielectric spectroscopy as a means to study the morphology of thermotropic liquid crystalline polymer fibers in a polypropylene composite matrix. Authors: A. Boersma and others. [PDF]
Technical paper about research aimed at providing a basis for the development of a drape model, based on the properties of the woven fabric and the mold shape. Authors: S.B. Sharma and M.P.F. Sutcliffe. [PDF]
Technical paper, presenting an investigation into the microstructure of cellulose fiber-reinforced injection molded polypropylene resin. Authors: Graig M. Clemons and others. [PDF]
Chapter from Science and Technology of Polymers and Advanced Materials, reviewing the economics of producing lignocellulosic fibers for thermoplastic composites. Author: Roger M. Rowell. [PDF]
Technical paper exmining the interfacial shear strength between bamboo fiber bundles extracted by mechanical scratching and steam explosion, and maleic anhydride polypropylene for the effect on reinforcing properties in thermoplastic composites. Authors: Nguyen Huy Tung and others.
A technical report providing individual specimen basic mechanical property testing and results for a reference crossply composite, and a quasi-isotropic version of the reference crossply. Author: M.B. Ruggles-Wren. [PDF]
Technical paper about an analytical investigation into the tailoring concept for flexible composite space tethers. Aothors: Kwangtea Ha and D. Stefan Dancila. [PDF]
Technical paper about the environmental degradation behaviour of flax fiber treated for improved moisture and rot sensitivity, for natural fiber reinforced polymer composites. Authors: A. Stamboulis and others. [PDF]
Technical paper describing a novel environmental technique and a new theoretical analysis which allow evaluation of the stress transfer capability and the fiber protection performance of a given surface treatment with sizing and coupling agents of fibers in a composite polymer matrix. Author: A.T. DiBenedetto. [PDF]
Technical paper presenting a study aiming to characterize the unaxial extensional flow behaviour of an engineering plastic resin as a function of the orientation distribution of its fiber content. Authors: Allen H. Wagner and others. [PDF]
Extensive technical paper presenting the results of manufacturing three-dimensionally woven preforms and composites with integrated extrinsic Fabry-Perot interferometric (EFPI) fiber optic strain sensors for in-situ health monitoring of composite structures. From 3Tex, Inc. Authors: A.E. Bogdanovich and others.
Technical paper aiming to relate non-crimp fabric (NCF) compressive and inter-laminar shear (ILS) behaviours, to the composite's characteristics, from which manufacturing guidelines to optimise NCF structure were derived. Authors: S. Drapier and M.R. Wisnom. [PDF]
Technical paper describing a new method developed for creating a resin transfer molded (RTM) preform using the filament winding process, and applicable to the production of tubular composite products. Authors: D. DeWayne Howell and Frank E. Roundy.
Technical paper presenting a methodology to constitute three-dimensional finite element model of heterogeneous material, such as textile composite, is investigated on the basis of the X-ray CT image of the cross-section. Autors: Naoaki Hirota and Nobuhiro Yoshikawa. [PDF]
Extensive technical paper describing the results of tests conducted on a carbon fiber/epoxy composite material to measure the fracture properties that could be used in developing allowables to design for damage tolerance criteria. Authors: Clarence C. Poe, Jr., James R. Reeder and F.G. Yuan.
Technical paper about the characterization of the processing, properties and structure of continuous fiber-reinforced composite materials, and a presentation of a ten-point plan for future requirements. From IUPAC. Authors: D.R. Moore and A. Cervenka. [PDF]
Technicalpaper about the materials, manufacturing technologies and uses of fiber reinforced composites, focused on natural and near natural fibers. From the German Aerospace Center's Institute of Structural Mechanics. [PDF]
Technical paper about an investigation into the impact behaviours of large deformable composites of Kevlar fiber reinforced composites of different preform structures. Authors: Tae Jin Kang and Cheol Kim. [PDF]
Technical paper reporting on the results of a study to improve the fundamental properties of lignin-based carbon fiber for composite components in the transportation industry. Authors: A.L. Compere and others. [PDF]
Technical paper about the dynamic mechanical analysis method employed to evaluate the performance of kenaf, newsprint, rice hulls and wood flour as source for fiber used in high-density polyethylene composites. Authors: Mehdi Tajvidi and others. [PDF]
Technical paper about the preparation of polypropylene (PP) and jute fibers for composites by an injection molding technique, and an analysis of the resulting properties. Authors: A.C. Karmaker and J.A. Youngquist. [PDF]
Technical paper reporting on a study of the commercial uses of kenaf fiber as fillers for composites with impact properties similar to wood-filled composites. Authors: Poo Chow and others. [PDF]
Master of Science thesis on the effect of transcrystalline interphases on the microscopic properties of semi-crystalline based composites. Extensive tables and figures. Author: Andras Gati.
Technical paper about the development of thermoplastic composites utilizing lignocellulosic, low quality hardwood fiber as reinforcing component. Authors: Timothy G. Rials and others. [PDF]
Information about the various technologies of man-made fiber spinning from natural and chemical polymers, composite reinforcement orientation, and fiber reinforced composite manufacturing techniques. Compiled by Grant Barker.
In-depth overview of fiber applications in cementitious composites, and the socio-economic considerations surrounding materials development in civil engineering related to them. From the University of Michigan. Author: Victor C. Li. [PDF]
Technical review of the opportunities and limiting factors which exist in terms of design capabilities, in the application of plant fibers in composites. Author: Roger M. Rowell. [PDF]
Master of Science thesis on seven separate PDF files, focusing on the manufacturing considerations and properties of cellulose ester composites, reinforced by lyocell fabrics and continuous fiber tow. Author: Indrajit Ghosh.
Edited version of a project report from Ellis Developments, Ltd, describing the use of embroidery techniques for the manufacture of reinforcement preforms for composite structures produced by liquid moulding.
Technical paper presenting the progress of an on-going research project to demonstrate the viability of using agricultural fibers and recycled plastics in producing thermoplastic composites. Authors: P. Chow and others.
Technical paper presenting a theoretical model to predict the response of laminated composites is developed. The micromechanical model simulates the mechanical response of a multi layer composite laminate under uniaxial, biaxial, and flexural loading modes. Author: Barzin Mobasher. [PDF]
Technical paper about the mechanics, modelling and analysis of fabric reinforced composites and structural components. From Autex Research Journal. Author: Evgeny V. Morozov. [PDF]
Technical paper presenting an experimental and modeling system for multilayer composite fabrics used in a gas turbine engine containment system. Authors: J. Sharda and others. [PDF]
Technical paper about a survey of the technologies for weft-knitted three-dimensional shape composite preforms development. From Autex Research Journal. Authors: M. de Araujo and others. [PDF]
Technical paper introducing novel software for truly integrated modelling and design of textile based composite reinforcements. Authors: Stephan V. Lomov and Ignaas Verpoest. [PDF]
Feature article about the importance natural fibers may acquire as a replacement for glass and other mineral fibers in the composite industry. From Plastics Technology. Author: Lilly Manolis Sherman.
Technical paper presenting an experimental investigation aimed at broadening the range of knitwear applications in the manufacture of composite products. From Autex Research Journal. Authors: Jolanta Janicka and others. [PDF]
Master of Science thesis about equivalent, 3D elastic moduli, determined from unit cell models of balanced plain weave, 2D braid, 2D triaxial braid, and 4x4 twill weave textile composite fabrics consisting of interlaced or intertwined yarns. Author; Nicolas Chretien. [PDF]
Technical paper presenting an approach using the homogenization and finite element method to predict the effective nonlinear elastic moduli of textile composites. Authors: X. Q. Peng and J. Cao. [PDF]
Technical paper discussing the porential for the increased use of natural fibers in the composites industry by improving its properties and characteristics. Author: Roger M. Rowell. [PDF]
Technical paper discussing the manufacturing processes, intended applications and relative benefits of four different types of active fiber composite actuators. Authors: R. Brett Williams and Daniel J. Inman. [PDF]
Review of the microscopic features, chemical composition and physical properties of the most important plant fibers used in technical textiles and nonwovens, and structural and non-structural composites. Authors: P.O. Olesen and D.V. Plackett. [PDF]
From the University of British Columbia's forestry department. Extensive review of the technical challenges and opportunities of the use of plant fiber in industrial composites. Author: Dr. James Bolton.
Scientific article on the improvements of the mechanical properties of polypropylene matric composite structures through the development of novel glass fiber sizing compositions. Author: Dr. Fabrizio Parodi.
Doctor of Science thesis about the relations between the structure and mechanical properties of flax fiber, and their effects on the properties of different flax fiber reinforced composites. The potential of application in various polymers, and the environmental impact is also investigated. Author: Harriėtte Bos. [PDF]
Master of Science thesis about the development of disposable nonwovens based fiber reinforced composites using cotton, kenaf, flax and biodegradable thermoplastic fibers. Author: Manjeshwar G. Kamath. [PDF]
Scientific paper analysing the thermal and mechanical behaviour of processed biocomposites, created by extrusion and injection molding a matrix of aromatic co-polyesters and ligno-cellulosic filler material. Authors: L. Averous and F. Le Digabel. [PDF]
Research paper about the establishment of properties and performance characteristics in composites of fiber extracted from unretted hemp stems. Objectives, method, materials, results and conclusions. From the UK Ministry of Agriculture, Fisheries and Food. Author: Dr. D. Murphy-Bokern. [PDF]
Review of the growing use of natural plant fibers as insulating and damping materials, and as fillers and reinforcement in composites for the automotive industry. Author: Dr. Thomas G. Schuh. [PDF]
Technical paper describing the results of a preliminary study of the various techniques and mechanisms involved in steam stabilisation of resin impregnated wood fiber boards. Authors: Roger Rowell and others. [PDF]
In-depth treaty on the origin, current application and possible improvements in the strain gage measurement calculations for plastics and composite materials. From The Measurement Group web site. [PDF]
Master of Science degree thesis about a comparison of properties between bi-component PP/PE SM (spunbond/meltblown) and SMS (spunbond/meltblown/spunbond) nonwovens, and 100% PP spunbond nonwovens as reinforcement matrixes of composites. Author: Shaker Gaddam. PDF document. [PDF]
Technical paper presenting a study of the fabrication of quasi carbon fiber/phenolic composites, and a comparison with phenolic composites reinforced with commercial PAN-based carbon fibers. Authors: Dongwan Cho and others. [PDF]
Extensive technical paper about the age hardening characteristics of an alloy modified by the introduction of a reinforcement. From MMC-Assess Thematic Network. Author: P. Merle.
Technical paper about isothermal crystallization performed to evaluate the transcrystalline effects caused by various sodium hydroxide and cellulase treated composite fibers. Authors: Soo Jin Son and others. [PDF]
Technical paper presented at the fifth International Conference on Woodfiber-Plastic Composites, summarising a 2-year testing program designed to assess the environmental degradation of wheat straw-filled polypropylene and polyethylene composites. Authors: Donna A. Johnson
Information pages about the history of composites and man-made fibers, and a detailed description of the composite reinforcement principles. From Composites Atlantic, Ltd.
Technical paper comparing the effectiveness of a maleated polypropylene (MAPP) as a coupling agent in extruded wood flour/polypropylene composites, and nonwoven web wood fiber/polypropylene composites. Authors: Andrzej M. Krzysik and others. [PDF]
